MAXnet Pre-Terminated Fiber Cassettes and Adapter Plates
- Multiple pre-terminated solutions for the EDGE, Colo-located and Hyperscale Data Centers
- Part of the Data Center Hybrid Panel product set that offers a universal footprint solution for Fiber, Copper, Coax, HDMI and any other keystone format into a single rack space
- Purpose built Fiber Cassette for a low loss rapid deployment solution
- Utilizes pre-terminated fiber cassettes with cable management for Cassette to Cassette or Cassette to break out fiber solutions
- MAXnet Cassettes provide all testing documentation, labeling as a service and guaranteed headroom for performance
- Rapid Deployment through Signamax’s Just Right Density™ approach when using pre-terminated MAXnet cassettes
- MAXnet pre-terminated cassettes available in standard and low loss format:
- MTP Standard Loss: Typical 0.15 dB, Max 0.35 dB
MTP Low Loss: Typical 0.10 dB, Max 0.25 dB
LC Standard Loss: Typical 0.15 dB, Max 0.25 dB
LC Low Loss: Typical 0.07 dB, Max 0.15 dB
- MTP Standard Loss: Typical 0.15 dB, Max 0.35 dB
- TRANSMISSION PERFORMANCE
ANSI/TIA-568-C.3: Insertion and return loss (100% tested)
Return loss:
OM4/OM5: ≤ 20 dB
OS2: ≤ 55 dB (8º angle polish)
*Insertion loss:
CS®/LC Connector:
OM4/OM5: 0.15 dB Typical, 0.25 dB Max
OS2: 0.15 dB Typical, 0.25 dB Max
MTP Elite® Performance:
OM4/OM5: 0.15 dB Typical, 0.35 dB Max
OS2: 0.15 dB Typical, 0.35 dB Max
*Typical is for all fibers/Max is for single fiber.
- CAPACITY
Max Fiber Density: 12 LC Ports
- MECHANICAL
Connector Ferrule: Ceramic
End-Face Radius of Curvature: 10 mm (0.39 in) < R < 30 mm (1.18 in)
Apex Offset: < 50 μm
- DIMENSIONS
MAXnet Cassettes: 1” H x 6.3” D x 4” W (28 x 160 x 105 mm)
Short Body Adapter Plates: 1” H x3” D x 4” W (28 x 80 x 105 mm)
- WEIGHT
MAXnet Cassettes: 0.51 lb (0.23 kg)
Short Body Adapter Plates: 0.17 lb (0.075 kg)
- CONSTRUCTION
MAXnet Cassettes:
Material: 0.036 in (0.9mm) Steel
Finish: black epoxy powder coating
Short Body Adapter Plates:
Material: 0.06 in (1.5mm) Aluminum Alloy
Finish: black epoxy powder coating
Rear Adapter Plate:
Material: 1.5mm 5052 h32
Finish: black cardinal e300-bk11
Front Adapter Plate:
Material: 0.9mm Carbon Steel a 653
Finish: black cardinal e300-bk11
Adapter Housing:
Material: Flame-retardant thermoplastic UL 94 V-0
Fiber:
Cable: 900 μm Buffered white simplex or 2 mm Jacketed duplex
Outer Jacket: Thermoplastic (OFNR-rated); Flame retardant PVC (OFNP)
Strain Relief: Thermoplastic
- ENVIRONMENTAL CONDITIONS
Service Temperature: -40 to 176 °F (-40 to 80 °C)
Operating RH: 93% Max (non-condensing)
- COMPLIANCE
ANSI/EIA-455-171 Method D3 & Method D1, IEC 61280-4-1
ANSI/TIA-568-C.3, ISO/IEC 11801 2nd Ed., IEC 61755-3-31/GRADE B, CENELEC EN
50173, UL94V-0, Flame Rating: NFPA262 (Plenum), UL1666 (Riser), UL1658 (FT4)
- WARRANTY
5 – Year Limited Component
MAXnet ADAPTER PLATESPart Number Description Add to [?] DCHF-LCM4-04 Hybrid Fiber Adapter Plate, 4 OM4 LC Ports DCHF-LCM4-06 Hybrid Fiber Adapter Plate, 6 OM4 LC Ports DCHF-LCM4-12 Hybrid Fiber Adapter Plate, 12 OM4 LC Ports DCHF-LCSM-04 Hybrid Fiber Adapter Plate, 4 SM LC Ports DCHF-LCSM-06 Hybrid Fiber Adapter Plate, 6 SM LC Ports DCHF-LCSM-12 Hybrid Fiber Adapter Plate, 12 SM LC Ports DCHF-MTPP-12 Hybrid Fiber Adapter Plate, 12 MTP Pass Thru Ports
MAXnet CASSETTESPart Number Description Add to [?] DCMFK-12M4HPUP-S200K 1 X 1U Hybrid Panel, 1 x Unloaded 24 Port Fiber Panel, 2 x MAXnet 12 Port Fiber OM4 LC Cassette to OM4 LC Duplex Fiber, 200ft OFNP Trunk, 24 x 2m OM4 Fiber patch cord and 1 x Zero U Front and Rear Cable Managers for strain relief and patch management DCMFK-12SMHPHP-C200K 2 X 1U Hybrid Panel with 2 x MAXnet 12 Port Fiber OS2 LC Cassette to Cassette, 200ft OFNP Trunk, 24 x 2m OS2 Fiber patch cord and 2 x Zero U Front and Rear Cable Managers for strain relief and patch management
DATA CENTER HYBRID PANEL