10/100 to 100FX Power Device PoE Media Converter

DISCONTINUED – 065-1052SC
For replacement options contact Technical Support

 

The Signamax 10/100 to 100FX PD PoE Media Converter bridges the gap between copper and fiber with out the need for a local power supply. The media converter is compatible with IEEE802.3af PoE and draws power via UTP cable connected to the PoE PSE. This is the perfect solution for areas of a network without AC power outlets.

The Link Fault Signaling capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault allowing network administrators to determine where the fault occurred.

 

 

  • Supports PoE (15.4 watt) Power Source Equipment (PSE)
  • Converts 100BaseTX to 100BaseFX
  • Applicable for areas no power outlet is available
  • DIP switch configuration for link fault signaling and fiber auto/force mode

 

 

  • APPLICABLE STANDARDS

IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3u 100BaseFX
IEEE 802.3af PoE

  • PORTS

1 – RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX port plus
1 – fiber optic 100BaseFX port; 62.5/125 or 50/125 micron multimode fiber optic cable, 2,000 meters maximum distance

  • LED STATUS INDICATORS

FX Link/Act, FX FDX/Col, TX Link/Act, TX 100, PSE Power Good, PSE Power Bad, Power Six LEDs total

  • PERFORMANCE

Latency: <4.5 µs (LIFO).
Throughput @ 100Base: 148,810 pps (64-byte packets)

  • FIBER INTERFACE

Type: LED
Wavelength: 1300 nm nominal (1270 nm max.,1380 nm min.)
Max Output Power: -14.0 dBm
Min Output Power: -20.0 dBm
Sensitivity: -33.0 dBm
Max Input Power: -8.0 dBm
Link Power Budget: 13.0 dB

  • ELECTRICAL CHARACTERISTICS

Maximum Wattage: 4.8 Watts
PSE Power Feed Support: “Endpoint” via TP pin 1, 2, 3, 6  or “Midspan” via TP pin 4, 5, 7, 8
Maximum PoE Draw: 100mA @ -48 V DC from IEEE 802.3af PSE or PoE injector
Power Supply:  External, 1 Amp @ +5 V DC (when not powered via PoE)

  • ENVIRONMENTAL CHARACTERISTICS

Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -4°F to 158°F (-20°C to 70°C)
Relative Humidity: 5% to 90% (non-condensing)

  • PHYSICAL CHARACTERISTICS

Dimensions: 3.70″L x 2.77″W x 1.03″H (94mm x 70.3mm x 26.2mm)
Weight: 0.5 pounds (0.23 kilograms)

  • CERTIFICATIONS

UL Listed

  • WARRANTY

Limited Lifetime

 

 

Download Specifications (PDF 428 Kb) Revised 03.28.2016