Wall-Mount Equipment Cabinets

  WEC-S-xx-600-xxx-BK    WEC-D-xx-600-xxx-BK
More Images

 

Signamax wall-mount equipment cabinets are a perfect solution for small to medium IT installations, for installations where either space is limited or security requirements exist. Cabinets may also serve as alternative spaces to the telecommunications room or entrance facility.
Designed to accommodate active and passive telecommunications equipment, these cabinets are supplied in two basic versions – single-section and dualsection, and a variety of heights – from 6 to 18 rack-mount units. Removable side doors equipped with a lock allows access to the cabinet contents from left, right or rear. Front door features a lock and toughened glass for easy inspection of cabinet contents and operational status of the installed equipment. An optional set of two fans can be installed to improved active equipment cooling where necessary.

 

 

  • Compliant with CEA 310-E, IEC 297-2, DIN 41491, DIN 4144 standards
  • Single- and dual-section designs
  • Heights – from 6 to 18 RMU
  • Three levels of depth (450 mm (17.7 in), 550 mm (21.7 in), 600 mm (23.6 in))
  • Cold-rolled steel construction: bearing elements – 1.5 mm (0.06 in), rear panel – 0.8 mm (0.03 in)
  • 60 kg (132 lb) static load
  • Removable side doors with locks
  • 180-degree-swing toughened-glass front door with lock, also removable
  • Equipment mounting hardware based on the cage-nut standard – easy replacement of damaged fasteners, protection of mounting flanges
  • Depth position of the mounting flanges can be adjusted to accommodate equipment with different form factors.
  • Knockout cable entry slots – top and bottom; additional slots in dual-section cabinets
  • Pre-fabricated holes and fenders for mounting fan assemblies
  • High-impact epoxy-powder anticorrosive paint

 

 

  • CONSTRUCTION

Material:
bearing frame and flanges: cold-rolled steel, 1.5 mm (0.06 in)
rear panel: cold-rolled steel, 0.8 mm (0.03)
housing frame: cold-rolled steel, 1.2 mm (0.05 in)
front door: toughened glass

  • MECHANICAL

Static load: 60 kg (132 lb)

  • MOUNTING DIMENSIONS

Model

Height, RMU

Height, mm (in)

Depth, mm (in)

Weight, kg (lb)


Single-section

WEC-S-06-600/450-BK

6

266.7 (10.50)

450.0 (17.72)

28 (62)

WEC-S-09-600/450-BK

9

400.1 (15.75)

450.0 (17.72)

29 (64)

WEC-S-12-600/450-BK

12

533.4 (21.00)

450.0 (17.72)

30 (66)

WEC-S-15-600/450-BK

15

666.8 (26.25)

450.0 (17.72)

31 (68)


Dual-section

WEC-D-06-600/550-BK

6

266.7 (10.50)

550.0 (21.65)

30 (66)

WEC-D-09-600/550-BK

9

400.1 (15.75)

550.0 (21.65)

30 (66)

WEC-D-12-600/550-BK

12

533.4 (21.00)

550.0 (21.65)

31 (68)

WEC-D-15-600/550-BK

15

666.8 (26.25)

550.0 (21.65)

34 (75)

WEC-D-15-600/600-BK

15

666.8 (26.25)

600.0 (23.62)

36 (79)

WEC-D-18-600/550-BK

18

800.1 (31.5)

550.0 (21.65)

39 (86)

WEC-D-18-600/600-BK

18

800.1 (31.5)

600.0 (23.62)

40 (88)

 

  • COMPLIANCE

CEA 310-E (former EIA-310-D), IEC 297-2, DIN 41491, DIN 4144

  • WARRANTY

5-year limited component warranty

 

 

Download Specifications (PDF 507Mb)

DownloadWEC-S-xx Drawing (PDF 406Kb) Revised 10.15.2011
Download WEC-D-xx Drawing (PDF 461Kb) Revised 10.15.2011

 

 

Single-section cabinets

Part NumberDescriptionAdd to [?] 
WEC-S-06-600/450-BKWall-mount equipment cabinet, single section, 6 RMU, W 600 mm D 450 mm, black

Project

WEC-S-15-600/450-BKWall-mount equipment cabinet, single section, 15 RMU, W 600 mm D 450 mm, black

Project


Cabinets are supplied with a set of mounting screws/nuts/washers and a wrench.


Dual-section cabinets

Part NumberDescriptionAdd to [?] 
WEC-D-12-600/550-BKWall-mount equipment cabinet, dual section, 12 RMU, W 600 D 450+100 mm, black

Project

WEC-D-15-600/600-BKWall-mount equipment cabinet, dual section, 15 RMU, W 600 D 500+100 mm depth, black

Project

WEC-D-18-600/550-BKWall-mount equipment cabinet, dual section, 18 RMU, W 600 D 450+100 mm, black

Project


Cabinets are supplied with a set of mounting screws/nuts/washers and a wrench.


Accessories

Part NumberDescriptionAdd to [?] 
WEC-CF-2Cooling fan assembly, 2 fans, 2-m (6-ft) cord with NEMA 5-15 plug, black

Project

WEC-MH-CN-50Mounting hardware, screw/cage-nut/washer, 50 sets in a PE bag

Project