F-Type Connector Feed-Thru Panels are available with either 1-GHz- or 3-GHz feed-thru (female-to-female) F-Type connectors. Panels are provided in 24 and 48-port sizes.
Panel:
Front: Steel with corrosive resistant black finish
Rear: Steel
Cable management bar: Thermoplastic with steel brackets
Panel: 19-in rack mountable
Depth:
Management Bar Installed: 6.0” (153 mm)
Management Bar Uninstalled: 1.5” (38 mm)
Height:
24FHD-FT: 1 RMU (1.75” (44.45 mm))
48FHD-FT: 2 RMU (3.50” (88.90 mm))
24F3HD-FT: 1 RMU (1.75” (44.45 mm))
48F3HD-FT: 2 RMU (3.50” (88.90 mm))
F-Type Connector:
D:30.0 mm H:19.7 mm W:16.5 mm (D:1.18 in H:0.77 in W:0.65 in)
F: up to 1 MHz
F3: up to 3 MHz
Coaxial, 75 Ohm (RG6/U, RG-58/U)
18 AWG–22 AWG (0.64 mm–1.07 mm) solid
Frequency range:
F: 1 GHz DC
F3: 3 GHz DC
Characteristic impedance: 75 Ohm
Insertion loss: <0.3 dB at 1 GHz
F: <0.3 dB
F3: <0.2 dB
Return loss:
F3: >30 dB
Contact resistance: <4 mOhm
Insulation resistance: min 500 MOhm at 100 Vdc
Inductance: min 500 nH
Capacitance: min 2 × 1.5 nF
Operational voltage: 250 Vdc
Test voltage: 750 Vdc for 1 min
Peak voltage rating: 500 V
Dielectric withstanding voltage: 1 500 Vrms
Feed-through current: max 10 A
Housing: high impact thermoplastic, UL94V-0 fire-retardant
Shell: brass, nickel plated
Seizing pin:
F: bronze alloy, tin-plated
F3: 360-degree beryllium bronze, gold-plated
Insulation:
F: low-density polyethylene (LDPE)
F3: nylon
Nut: iron-plated with nickel over copper
Mating cycles: min 500
Holding force:
>160 g (initial)
>120 g (after insertion)
Interface dimensions: similar to MIL-C-39012
Housing shall support 2.2 kgf minimum applied from either direction
Storage: -40 °C to +70 °C (-40 °F to +158 °F)
Operation: -10 °C to +60 °C (+14 °F to +140 °F)
RH (operation): max non-condensing 93 %
Vibration, shock, and temperature cycling in accordance with MIL-STD-1344
ANSI/SCTE 02, IEC 60169-24, UL 94V-0
Over-the-air terrestrial television, cable television, satellite television, cable modems
5-year Limited Component