Category 6 MDX-Series Unscreened Patch Panels

More Images

 

The next step in integration in the complete copper communication solution – SIGNAMAX MDX-Series Patch Panel.

The MDX was designed based on the best features of our MD and EC-Series panels with a new innovative twist that offers cable management within the same rack space as the panel.  Slots were designed in between each block of ports for cable management rings offering custom patch cord management configurations, along with, two different options for port identification.  The clear hinged window feature allows for custom marked ports, whereas, the small pads along the bottom of each port offers quick notation. Each panel is equipped with plastic fillers to cover the mounting slots when they are unnecessary. The new and improved SIGNAMAX MDX Patch Panel ensures flexibility at the time of initial  installation and during service operations.

 

 

  • Exceeds ANSI/TIA-568-C.2 Category 6 component performance
  • UL listed and TAA compliant
  • Designed with multiple cable management options in the front and rear of the panel to accommodate any install configuration
  • Modular blocks with built-in PCB-based jacks ensure Category 6 parameters
  • Easy-to-read T568A/B wiring scheme color-coded label
  • Standard termination with single-position or multi-pair 110 termination tools
  • Hinged clear windows over each set of ports for quick identification

 

 

  • TRANSMISSION PERFORMANCE

ANSI/TIA-568-C.2: exceeds category 6 (1 MHz–250 MHz) component specifications

  • TRANSMISSION MEDIA

Unscreened twisted pair (U/UTP)

  • JACK TYPE

8p8c (8-position, 8-contact) “RJ45″ style

  • WIRING SCHEME

ANSI/TIA-568-C.2: T568A & T568B
ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)

  • WIRE GAUGE

22 to 24 AWG (0.644 to 0.511 mm)

  • ELECTRICAL

Insulation Resistance: Min 500 MOhm @ 100 Vdc
Dielectric Withstanding Voltage: 1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min
Spring Wire Contact Resistance: Max 20 mOhm
IDC Contact Resistance: Max 2.5 mOhm
Current Rating: Refer to downloadable spec sheet

  • CONSTRUCTION

Panel: Steel with corrosive resistant black finish
Connector:
Housing: High impact thermoplastic, UL94V-0 fire retardant
Spring Wire: 
Phosphor bronze alloy plated with 50 ÎĽin of gold over 70 to 100 ÎĽin of nickel
IDC:
110 type, phosphor bronze alloy with 100 ÎĽin 100% tin alloy

  • MECHANICAL

Total Contact Force: Min 800 g for 8 wire leads with FCC compliant 8p8c plug
Retention: 50 N (11 lbf) for 60 ± 5 s
Mating Cycle Life: Min 750 cycles with FCC compliant 8p8c plug

  • DIMENSIONS

Panel: 19-in rack mountable
Depth:
Panel (only): 1.4” (35 mm)
CMB-250-P: Front-mounted: 2.5” (65 mm); Rear-mounted: 2.1” (80 mm)
CMB-550-M: Front-mounted: 5.6” (140 mm); Rear-mounted: 6.1” (155 mm)
CMBRKT-01: 2.5” (65 mm) front-mount only
Height:
24458MDX-C6: 1 RMU (1.75” (44.45 mm))
48458MDX-C6: 2 RMU (3.50” (88.90 mm))

  • ENVIRONMENTAL CONDITIONS

Operating Temperature: 14 °F to 140 °F (-10 °C to 60 °C)
Storage Temperature: -40 °F to 158 °F (-40 °C to 70 °C)
Operating RH: 93% Max (non-condensing)

  • COMPLIANCE

ANSI/TIA-568-C.2, IEEE 802.3 ab, FCC Part 68 Subpart F, UL 94V-0, UL 1863, IEC 60603-7

  • APPLICATIONS

X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD

  • WARRANTY

 5-year Limited Component
10-year Signamax Base Trunk
15-year Signamax Extended Component
25-year Signamax Cabling System

 

 

Download Specifications (PDF 1.4 Mb) Revised 02.2019

Download Drawing (PDF 972 Kb) Revised 02.2019

 

 

Part NumberDescriptionAdd to [?] 
24458MDX-C624-Port Category 6 MDX-Series Patch Panel, 1U

Project

48458MDX-C648-Port Category 6 MDX-Series Patch Panel, 2U

Project

 

Accessories

Part NumberDescriptionAdd to [?] 
CMBRKT-01-5Panel-Mount CM Bracket, 65 x 40 mm, 5-Pack

Project

CMB-550-MPanel-Mount Cable Management Bar, Metal Body, 5.5-in Deep

Project

CMB-250-PPanel-Mount Cable Management Bar, Plastic Body, 2.50″-Deep

Project

 

Don’t forget the Patch Cords or more importantly the Rack.