Category 5e Screened Patch Cords

C6CS-114-GY

 

 

The Signamax Category 5e Screened Patch Cords have been designed to meet the need for today’s high-bandwidth applications. These patch cords incorporate a slim profile snag-free boot design which protects the plug latch and offers greater flexibility. The cords are 100% transmission tested and support category 5e component level performance.

Manufactured using ETL verified 24-AWG stranded cable design to support a greater service life. Assembled in a controlled environment to ensure consistent quality, these patch cords provide reliable performance when mated with any category 5e connecting hardware and deliver supreme performance for network cabling systems.

 

 

  • Meets ANSI/TIA-568-C.2 transmission performance specifications
  • 100% factory transmission tested per ANSI/TIA-568-C.2 to ensure category 5e component level performance
  • 100% protection against ANEXT
  • ETL verified screened 24 AWG stranded cable
  • Rated for 750 plug insertions for high level system reliability
  • Enhanced plug-to-jack connection integrity
  • Seven standard lengths & eight jacket colors
  • Slim-profile & snag-free boot designed for the highest density applications

 

 

  • TRANSMISSION PERFORMANCE

ANSI/TIA-568-C.2: meets or exceeds category 5e (1-100 MHz) specifications

  • TRANSMISSION MEDIA

4-pair stranded screened twisted pair (ScTP/FTP))

  • WIRING SCHEME

ANSI/TIA-568-C.2: T568A & T568B
ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)

  • ELECTRICAL

Insulation Resistance: Min 500 MOhm @ 100 Vdc
Dielectric Withstanding Voltage:
1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min
1,500 Vdc/ac peak contact-to-panel @ 60 Hz for 1 min
Contact Resistance: Max 20 mOhm
Current Rating: Refer to downloadable spec sheet.

  • CONSTRUCTION

Assembly: 4 pairs, 7 strands 24 AWG, ScTP/FTP
Insulation: High density polyethylene
Plug Housing: UL listed 94V-0 flame retardant polycarbonate
IDC Blades: Phosphor bronze, min 50 μin of gold plating over 100 μin of nickel in contact area
Screen: Brass alloy plated with 100 Iin of nickel
Jacket:
Dimensions: Diameter < 0.25 in (6.35 mm)
Material: Flame retardant PVC compound

  • MECHANICAL

Retention: 50 N (11 lbf) for 60 ± 5 s
Mating Cycle Life: Min 750 cycles
Tensile Strength: ≥ 20 N per wire

  • ENVIRONMENTAL CONDITIONS

Operating Temperature: 14 °F to 140 °F (-10 °C to 60 °C)
Storage Temperature: -40 °F to 158 °F (-40 °C to 70 °C)
Operating RH: 93% Max (non-condensing)

  • COMPLIANCE

ANSI/TIA/EIA-568-C.2, ISO/IEC 11801 2nd Ed., FCC Part 68, UL 1863, UL 94V-0

  • APPLICATIONS

X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD

  • WARRANTY

5-year Limited Component
10-year Signamax Base Trunk
15-year Signamax Extended Component
25-year Signamax Cabling System

 

 

Download Specifications (PDF 444 Kb) Revised 07.21.2016

 

 

Part NumberDescriptionAdd to [?] 
C5ES-314GY-3FBCategory 5e Screened Patch Cords w/Snag-Proof Boots, 3 FT.

Project

C5ES-314GY-5FBCategory 5e Screened Patch Cords w/Snag-Proof Boots, 5 FT.

Project

C5ES-314GY-7FBCategory 5e Screened Patch Cords w/Snag-Proof Boots, 7 FT.

Project

C5ES-314GY-10FBCategory 5e Screened Patch Cords w/Snag-Proof Boots, 10 FT.

Project

C5ES-314GY-15FBCategory 5e Screened Patch Cords w/Snag-Proof Boots, 15 FT.

Project

C5ES-314GY-20FBCategory 5e Screened Patch Cords w/Snag-Proof Boots, 20 FT.

Project

C5ES-314GY-25FBCategory 5e Screened Patch Cords w/Snag-Proof Boots, 25 FT.

Project


Standard cable color is gray.  Additional colors and lengths are available for special order.  Contact Customer Service.