10/100/1000 to 1000 SX/LX Media Converters
The Signamax 10/100/1000 to 1000 SX/LX Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT and 100BaseTX networks and 1000Base Gigabit Ethernet networks. The built-in switch enables the fiber cable connection to operate at 1000 Mbps connected to either a 10BaseT, 100BaseTX, or a 1000BaseT network, while remaining completely 1000BaseSX or 1000BaseLX standard-compliant for the fiber optic connection. The fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex legacy hub.
Improvements in the this series of media converters include: extremely low latency, the ability to force the RJ-45 port to 100Base or 10Base full or half-duplex modes, provide auto-negotiation on the 1000Base fiber port or forced full-duplex mode where required, and the enabling or disabling of the Link Fault Signaling feature.
Application Reference: Security Camera Network, Extended Over Fiber (PDF 477 Kb) Revised 07-27-2016
- Extremely low latency supports larger multi-hop networks
- Extremely high reliability; MTBF of over 112 years
- Gigabit transmission supports 9K bytes jumbo frames
- IEEE 802.3x flow control for full duplex and back pressure for half duplex supported
- DIP switch configuration for link fault signalling, fiber auto/force mode, and SFP speed
- Full wire-speed forwarding rate
- Supports wall mounting, DIN-rail mounting or use with media converter rack mount chassis
- APPLICABLE STANDARDS
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX
IEEE 802.3z 1000BaseLX
IEEE 802.3x Flow Control
- PORTS
1 – RJ-45 10/100/10000BaseT/TX port.
1 -1000BaseSX or 1000BaseLX fiber optic port.
- LED STATUS INDICATORS
Per Unit: Power; LFS Status; Full Duplex
Per RJ-45 Port: Link Copper; Copper port speed (Green = 1000 Mbps, Amber = 100 Mbps, off = 10 Mbps)
Per Fiber Port: Link Fiber
- PERFORMANCE
Latency: ≤1.5 μs (FIFO).
MTBF: 985,339.89 hours (112.48 years), calculated via the Part Stress Analysis Method.
Throughput, per port: @ 1000Base: 1,488,100 pps (64-byte packets); @ 100Base: 148,810 pps (64-byte packets)
Switch Fabric Speed: 4.0 Gbps (non-blocking, wire speed performance)
Frame Buffer: 12K total
Jumbo Frame Support: 9K packets supported
- DIP SWITCH SETTINGS
| No. | Down | Up | Notes |
| 1 | Disable LFS | Enable LFS | LFS: Link Fault Signaling function |
| 2 | Enable Auto-Negotiation for TX port | Enable Force mode for TX port | |
| 3 | TX port Force mode: Full-duplex | TX port Force mode: Half-duplex | |
| 4 | TX port Force mode: 100 Mbps | TX port Force mode: 10 Mbps | |
| 5 | Function reserved | Function reserved | |
| 6 | Function reserved | Function reserved |
- FIBER INTERFACE
Type:
P/Ns 065-1196A/1196AED: Laser Diode
P/Ns 065-1196ALX/1196ALXED: MQW Laser
Wavelength:
P/N 065-1196A: 850 nm nominal (830 nm max.,860 nm min.)
P/N 065-1196AED: 1310 nm nominal (1270 nm max.,1355 nm min.)
P/N 065-1196ALX: 1300 nm nominal (1270 nm max.,1355 nm min.)
P/N 065-1196ALXED: 1300 nm nominal (1261 nm max.,1360 nm min.)
Max Output Power:
P/N 065-1196A: -4.0 dBm
P/N 065-1196AED: 0.0 dBm
P/Ns 065-1196ALX/1196ALXED: -3.0 dBm
Min Output Power:
P/N 065-1196A: -9.5 dBm
P/N 065-1196AED: -6.0 dBm
P/N 065-1196ALX: -11.0 dBm
P/N 065-1196ALXED: -8.0 dBm
Sensitivity:
P/N 065-1196A: -13.5 dBm
P/N 065-1196AED: -17.0 dBm
P/Ns 065-1196ALX/1196ALXED: -22.0 dBm
Max Input Power:
P/N 065-1196A: -13.5 dBm
P/N 065-1196AED: 0.0 dBm
P/Ns 065-1196ALX/1196ALXED: -3.0 dBm
Link Power Budget:
P/N 065-1196A: 4.0 dB
P/N 065-1196AED/ 1196ALX: 11.0 dB
P/N 065-1196ALXED: 14.0 dB
- ELECTRICAL CHARACTERISTICS
12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included.
- ENVIRONMENTAL REQUIREMENTS
Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -14°F to 158°F (-10°C to 70°C)
Relative Humidity: 5% to 95% (non-condensing)
- PHYSICAL CHARACTERISTICS
Dimensions: 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm)
Weight: 0.33 lb (150 g)
- CERTIFICATIONS
CE, FCC, ROHS, VCCI Class A
- WARRANTY
Limited Lifetime
Download Specifications (PDF 358 KB) Revised 03-2016
Download User’s Guide (PDF 189 KB) Revised 01-2014
Download Rev2 Quick Start Guide (PDF 281KB) Revised 01-2023
| Part Number | Description | Add to [?] |
| 065-1196A | 10/100/1000BaseT/TX to 1000BaseSX Media Converter, SC/MM 220 m Span on 62.5 μm Fiber / 550 m Span on 50 μm Fiber | |
| 065-1196AED | 10/100/1000BaseT/TX to 1000BaseSX Media Converter, SC/MM 2 km Span on 62.5 μm or 50 μm Fiber | |
| 065-1196ALX | 10/100/1000BaseT/TX to 1000BaseLX Media Converter, SC/SM, 10 km Span | |
| 065-1196ALXED | 10/100/1000BaseT/TX to 1000BaseLX Media Converter, SC/SM, 20 km Span |
Mounting Options
| Part Number | Description | Add to [?] |
| AM10010 | DIN-Rail Mounting for 065-11xx Series and 065-1696SFPDR Media Converters | |
| 065-1185 | 16-Bay Rack Mount Media Converter Chassis, AC |
