Category 6A MT-Series Unscreened Keystone Jacks

 
KJ458MT-CXX-WH (Back w Cover)KJ458MT-CXX-WH_Back
 

 

The Signamax Category 6A Unscreened MT-Series Keystone Jacks have been designed to meet the need for today’s high bandwidth applications. These connectors are slim in profile for the highest density applications and have the ability to mount either color-coded icons for service identification or dust covers to protect unused jacks from dust and other contaminants.

Special design features allow these jacks to be terminated with a standard 110 single-position tool or with the Signamax four-pair tool. The contact design provides enhanced plug-to-jack connection integrity, protects against damage caused by insertion of 4- or 6-position plugs, and is rated for a minimum of 750 plug insertions providing for the highest level of system reliability.

 

 

  • Exceed ANSI/TIA-568-C.2 component performance specifications
  • Meets IEEE 802.3an 10 Gigabit Ethernet transmission requirements
  • Eliminates alien crosstalk with solid-metal cable-retention cap
  • Slim profile for the highest density applications
  • Improved wire retention and ease of termination with rear 110 type contacts
  • Easy-to-read T568A/B wiring scheme color-coded label
  • Circuit identification icons, dust covers, and 110 protection caps included in kit

 

 

  • TRANSMISSION PERFORMANCE

ANSI/TIA-568-C.2: meets or exceeds category 6A (1-500 MHz) component specifications

  • TRANSMISSION MEDIA

Unscreened twisted pair (U/UTP)

  • JACK TYPE

8p8c (8-position, 8-contact) “RJ45” style

  • WIRING SCHEME

ANSI/TIA-568-C.2: T568A & T568B
ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)

  • WIRE GAUGE

22 to 24 AWG (0.644 to 0.511 mm)

  • ELECTRICAL

Insulation Resistance: Min 500 MOhm @ 100 Vdc
Dielectric Withstanding Voltage: 1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min
Spring Wire Contact Resistance: Max 20 mOhm
IDC Contact Resistance: Max 2.5 mOhm
Current Rating: Refer to downloadable spec sheet.

  • CONSTRUCTION

Housing: High impact thermoplastic, UL94V-0 fire retardant
Jack Spring Wire: Phosphor bronze alloy plated with 50 μin of gold over 70 to 100 μin of nickel
IDC: 110 type, phosphor bronze alloy with 100 μin 100% tin alloy

  • MECHANICAL

Total Contact Force: Min 800 g for 8 wire leads
Retention: 50 N (11 lbf) for 60 ± 5 s
Mating Cycle Life: Min 750 cycles

  • FOOTPRINT

Standard keystone footprint

  • MOUNTING DIMENSIONS:

1.213” D x 0.665” W x 0.76” H (30.8 mm x 16.9 mm x 19.3 mm)

  • ENVIRONMENTAL CONDITIONS

Operating Temperature: 14 °F to 140 °F (-10 °C to 60 °C)
Storage Temperature: -40 °F to 158 °F (-40 °C to 70 °C)
Operating RH: 93% Max (non-condensing)

  • COMPLIANCE

ANSI/TIA-568-C.2, IEEE 802.3 ab, FCC Part 68 Subpart F, UL 94V-0

  • APPLICATIONS

X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD

  • WARRANTY

5-year Limited Component
10-year Signamax Base Trunk
15-year Signamax Extended Component
25-year Signamax Cabling System

 

 

Download Specifications (PDF 734 Kb) Revised 06.07.2016

Download Drawing (PDF 124 Kb) Revised 07.01.2010

Download Installation Instructions (PDF 2.29 Mb) Revised 03.22.2010

 

 

Part NumberDescriptionAdd to [?] 
KJ458MT-C6ACCategory 6A MT-Series Keystone Jack, T568A/B Wiring, Light Ivory

Project

KJ458MT-C6AC-WHCategory 6A MT-Series Keystone Jack, T568A/B Wiring, White

Project

KJ458MT-C6AC-YECategory 6A MT-Series Keystone Jack, T568A/B Wiring, Yellow

Project

KJ458MT-C6AC-ORCategory 6A MT-Series Keystone Jack, T568A/B Wiring, Orange

Project

KJ458MT-C6AC-RDCategory 6A MT-Series Keystone Jack, T568A/B Wiring, Red

Project

KJ458MT-C6AC-BUCategory 6A MT-Series Keystone Jack, T568A/B Wiring, Blue

Project

KJ458MT-C6AC-GNCategory 6A MT-Series Keystone Jack, T568A/B Wiring, Green

Project

KJ458MT-C6AC-GYCategory 6A MT-Series Keystone Jack, T568A/B Wiring, Gray

Project

KJ458MT-C6AC-BKCategory 6A MT-Series Keystone Jack, T568A/B Wiring, Black

Project