1-Port Gigabit-Capable PoE+ Power Injector

DISCONTINUED – 065-POEINJ-GA
For Replacement options see End-of-Life Notifications

 

 

The Signamax 1-Port Gigabit Capable PoE+ Power Injector is designed to be a compact and cost effective full IEEE 802.3at (30 watts) and IEEE 802.3af (15.4 watts) compliant solution for network cameras, IP phones, outdoor and indoor wireless access points, and other IP terminal installations. The injector operates at an extended temperature range from -22°F to 140°F (-30°C to 60°C).

Unlike many competing products, the Signamax power injector supports a 10/100/1000BaseT/TX RJ45 connection utilizing phantom power over RJ45 pins 1, 2, 3, and 6 in a compact package for wall or desktop mounting. This rugged, compact, and costeffective PoE+ power injector is the easy answer for individual PoE or PoE+ deployments where PoE switches are not appropriate.

 

 

  • 10BaseT, 100BaseTX, and 1000BaseT support
  • Supports PoE+ (30 watt) Power Source Equipment (PSE)
  • Rugged wall-mountable high-strength molded housing

 

 

  • Applicable Standards

IEEE 802.3 10BaseT, 100BaseTX, 1000BaseT
IEEE 802.3af PoE (15.4 watts)
IEEE 802.3at PoE+ (30 watts)

  • Ports

1 – RJ-45 10/100/1000BaseT/TX inbound data port, plus
1 – RJ-45 10/100/1000BaseT/TX outbound data plus power port.

  • Electrical Characteristics

Input Power: Voltage: 90 to 264 V AC; Current: 750 mA;
Output Power: 46 V DC to 57 V DC; 30 Watts.
Pin Assignment and Polarity: 1 & 2 (+); 3 & 6 (-).

  • Environmental Requirements

Operating Temperature: -22°F to 140°F (-30°C to 60°C)
Storage Temperature: -49°F to 185°F (-45°C to 85°C)
Operating Humidity: 35% to 95% (non-condensing)

  • Physical Characteristics

Case Dimensions: 5.35” W x 2.56” D x 1.52”H (136 mm x 65 mm x 38.5 mm)
Housing: Molded Case
Weight: 0.37 lb (168 g)

  • Warranty

Five Years

 

 

Download Specifications (PDF 369 Kb) Revised 08.12.2016

Download Installation Guide (PDF 406 Kb) Revised 03.07.2014