10/100 to 100FX Media Converters with USB Power Option

 

 

 

The Signamax 10/100 to 100FX Media Converters with USB Power Option provides a built-in 10/100 switch that enables the fiber cable connection to operate at 100 Mbps, while remaining completely 100BaseFX standard-compliant for the fiber optic connection. The fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex legacy hub. The built-in switch and its store-and forward switching architecture performs the network segmentation that allows the maximum fiber distance extension.

An USB power connector on the rear panel provides additional power options where AC power outlets are unavailable. The Link Fault Signaling provides a means of propagating a link drop on either port of the media converter to the other port, enabling a connected managed switch to see the link drop and respond to it using Spanning Tree Protocol or another recovery scheme.  This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks.

 

 

  • Available with SC, ST, MT-RJ, and LC connectors
  • DIP switch configuration for link fault signalling and fiber auto/force mode
  • Built-In 10/100BaseT/TX switch utilizes store-and-forward architecture
  • USB power option for added convenience
  • Supports wall mounting, DIN-rail mounting or use with media converter rack mount chassis

 

 

  • APPLICABLE STANDARDS

IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3u 100BaseFX

  • PORTS

1 – RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX port plus
1 – fiber optic 100BaseFX port with varying connectors and span per P/N

  • LED STATUS INDICATORS

Per Unit: Power
Per RJ-45 Port: Link/Activity, Full Duplex/Collision (FDX/COL); RJ-45 port speed
Per Fiber Port: Link/Activity, Full Duplex/Collision (FDX/COL)

  • PERFORMANCE

Latency: < 4.2 μs (LIFO)
Throughput, per port: @ 100Base: 148,809 pps (64-byte packets)
Speed: 100BaseTX: 100/200 Mbps for half/full duplex; 10BaseT: 10/20 Mbps for half/full duplex
MAC Address Capacity: 1K; Memory: 256 KB

  • FIBER INTERFACE

Multimode P/Ns
Type: LED
Wavelength: 1300 nm nominal (1270 nm max.,1355 nm min.)
Max Output Power: -14.0 dBm
Min Output Power: -20.0 dBm
Sensitivity: -33.0 dBm
Max Input Power: -8.0 dBm
Link Power Budget: 13.0 dB

Singlemode P/Ns
Type: MQW Laser
Wavelength:
1300 nm nominal (1260 nm max.,1360 nm min.)
Max Output Power: -7.0 dBm
Min Output Power: -15.0 dBm
Sensitivity: -34.0 dBm
Max Input Power: -7.0 dBm
Link Power Budget: 19.0 dB

  • ELECTRICAL CHARACTERISTICS

12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included.
USB power connector on the rear panel optionally powers converter from computer’s USB port

  • ENVIRONMENTAL REQUIREMENTS

Operating Temperature: 32°F ~ 104°F (0°C ~ 40°C)
Storage Temperature: -13°F ~ 158°F (-25°C ~ 70°C)
Relative Humidity: 10 ~ 90%, non-condensing

  • PHYSICAL CHARACTERISTICS

Dimensions: 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm)
Weight: 0.33 lb (150 g)

  • CERTIFICATIONS

CE, FCC, ROHS, VCCI Class A

  • WARRANTY

Limited Lifetime

 

Download Specifications (PDF 332 Kb) Revised 04.07.16

Download User’s Guide (PDF 126 Kb) Revised 10.15.03

Download DIN-Rail Mounting Instructions (PDF 16 Kb) Revised 10.08.2010

 

 

Part NumberDescriptionAdd to [?] 
065-1100LFS10/100BaseT/TX to 100BaseFX Media Converter ST/MM, 2 km Span, USB Power Option

Project

065-1110LFS10/100BaseT/TX to 100BaseFX Media Converter SC/MM, 2 km Span, USB Power Option

Project

065-1174LFS10/100BaseT/TX to 100BaseFX Media Converter LC/MM, 2 km Span, USB Power Option

Project

Mounting Options

Part NumberDescriptionAdd to [?] 
065-11DINMTDIN-Rail Mounting for 065-11xx Series and 065-1696SFPDR Media Converters

Project

065-118516-Bay Rack Mount Media Converter Chassis, AC

Project