10/100/1000 to 100/1000 SFP Media Converter

FO-065-1196SFPDR

 

The Signamax 10/100/1000 to 100/1000 SFP Media Converters provides a flexible and intelligent solution for long distance connections between legacy 10BaseT and 100BaseTX networks and either 1000Base Gigabit Ethernet fiber or 100Base fiber networks. The built-in 10/100/1000 switch enables the fiber cable connection to operate at 1000 Mbps, while remaining completely 1000BaseSX/LX or 100BaseFX/BX standard-compliant for the fiber optic connection.

The dual-rate fiber converter includes the ability to force the RJ-45 port to 100Base or 10Base full or half-duplex modes where required.  The Link Fault Signaling provides a means of propagating a link drop on either port of the media converter to the other port, enabling a connected managed switch to see the link drop and respond to it using Spanning Tree Protocol or another recovery scheme.

 

 

  • Dual-Rate 1000Base or 100Base SFP capability
  • Extremely low latency supports larger multi-hop networks
  • Extremely high reliability; MTBF of over 212 years
  • Gigabit transmission supports 9K bytes jumbo frames
  • IEEE 802.3x flow control for full duplex and back pressure for half duplex supported
  • DIP switch configuration for link fault signalling, fiber auto/force mode, and SFP speed
  • Full wire-speed forwarding rate
  • Supports wall mounting, DIN-rail mounting or use with media converter rack mount chassis

 

 

  • APPLICABLE STANDARDS

IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX
IEEE 802.3z 1000BaseLX
IEEE 802.3x Flow Control

  • PORTS

1 – RJ-45 10/100/10000BaseT/TX port plus
1 -Dual-rate 1000Base or 100Base SFP port

  • LED STATUS INDICATORS

Per Unit: Power; LFS Status; Full Duplex
Per RJ-45 Port: Link Copper; Copper port speed (Green = 1000 Mbps, Amber = 100 Mbps, off = 10 Mbps)
Per SFP Port: Link Fiber

  • PERFORMANCE

Latency: ≤1.6 μs (FIFO).
MTBF: 1,857,775.35 hours (212.07 years), calculated via the Part Stress Analysis Method.
Throughput, per port: @ 1000Base: 1,488,100 pps (64-byte packets); @ 100Base: 148,810 pps (64-byte packets)
Switch Fabric Speed: 4.0 Gbps (non-blocking, wire speed performance)
Frame Buffer: 12K total
Jumbo Frame Support: 9K packets supported

  • DIP SWITCH SETTINGS
 
No. Down Up Notes
1 Disable LFS Enable LFS LFS: Link Fault Signaling function
2 Enable Auto-Negotiation for TX port Enable Force mode for TX port  
3 TX port Force mode: Full-duplex TX port Force mode: Half-duplex  
4 TX port Force mode: 100 Mbps TX port Force mode: 10 Mbps  
5 SFP at 100 Mbps SFP at 1000 Mbps  
6 Function reserved Function reserved  

 

  • ELECTRICAL CHARACTERISTICS

12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included.

  • ENVIRONMENTAL REQUIREMENTS

Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -14°F to 158°F (-10°C to 70°C)
Relative Humidity: 5% to 95% (non-condensing)

  • PHYSICAL CHARACTERISTICS

Dimensions: 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm)
Weight: 0.33 lb (150 g)

  • CERTIFICATIONS

CE, FCC, ROHS, VCCI Class A

  • WARRANTY

Litmited Lifetime

 

 

Download Specifications (PDF 320 Kb) Revised 03.30.2016

Download User’s Guide (PDF241 Kb) Revised 02.06.2012

 

 

 

Part NumberDescriptionAdd to [?] 
065-1196SFPDR10/100/1000BaseT/TX to Dual-Rate 100Base or 1000Base SFP Media Converter

Project


Note: Please see our SFP Section for availability and specification information.

Mounting Options

Part NumberDescriptionAdd to [?] 
AM10010DIN-Rail Mounting for 065-11xx Series and 065-1696SFPDR Media Converters

Project

065-118516-Bay Rack Mount Media Converter Chassis, AC

Project