10/100/1000 to 1000 SX/LX Media Converters

 

The Signamax 10/100/1000 to 1000 SX/LX Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT and 100BaseTX networks and 1000Base Gigabit Ethernet networks. The built-in switch enables the fiber cable connection to operate at 1000 Mbps connected to either a 10BaseT, 100BaseTX, or a 1000BaseT network, while remaining completely 1000BaseSX or 1000BaseLX standard-compliant for the fiber optic connection. The fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex legacy hub.

Improvements in the this series of media converters include: extremely low latency, the ability to force the RJ-45 port to 100Base or 10Base full or half-duplex modes, provide auto-negotiation on the 1000Base fiber port or forced full-duplex mode where required, and the enabling or disabling of the Link Fault Signaling feature.

Application Reference: Security Camera Network, Extended Over Fiber (PDF 477 Kb) Revised 07-27-2016

 

 

  • Extremely low latency supports larger multi-hop networks
  • Extremely high reliability; MTBF of over 112 years
  • Gigabit transmission supports 9K bytes jumbo frames
  • IEEE 802.3x flow control for full duplex and back pressure for half duplex supported
  • DIP switch configuration for link fault signalling, fiber auto/force mode, and SFP speed
  • Full wire-speed forwarding rate
  • Supports wall mounting, DIN-rail mounting or use with media converter rack mount chassis

 

 

  • APPLICABLE STANDARDS

IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX
IEEE 802.3z 1000BaseLX
IEEE 802.3x Flow Control

  • PORTS

1 – RJ-45 10/100/10000BaseT/TX port.
1 -1000BaseSX or 1000BaseLX fiber optic port.

  • LED STATUS INDICATORS

Per Unit: Power; LFS Status; Full Duplex
Per RJ-45 Port: Link Copper; Copper port speed (Green = 1000 Mbps, Amber = 100 Mbps, off = 10 Mbps)
Per Fiber Port: Link Fiber

  • PERFORMANCE

Latency: ≤1.5 μs (FIFO).
MTBF: 985,339.89 hours (112.48 years), calculated via the Part Stress Analysis Method.
Throughput, per port: @ 1000Base: 1,488,100 pps (64-byte packets); @ 100Base: 148,810 pps (64-byte packets)
Switch Fabric Speed: 4.0 Gbps (non-blocking, wire speed performance)
Frame Buffer: 12K total
Jumbo Frame Support: 9K packets supported

  • DIP SWITCH SETTINGS
 No.  Down  Up  Notes
 1  Disable LFS  Enable LFS  LFS: Link Fault Signaling function
 2  Enable Auto-Negotiation for TX port  Enable Force mode for TX port  
 3  TX port Force mode: Full-duplex  TX port Force mode: Half-duplex  
 4  TX port Force mode: 100 Mbps  TX port Force mode: 10 Mbps  
 5   Function reserved  Function reserved  
 6  Function reserved  Function reserved  

 

  • FIBER INTERFACE

Type:
P/Ns 065-1196A/1196AED: Laser Diode
P/Ns 065-1196ALX/1196ALXED: MQW Laser
Wavelength:
P/N 065-1196A: 850 nm nominal (830 nm max.,860 nm min.)
P/N 065-1196AED: 1310 nm nominal (1270 nm max.,1355 nm min.)
P/N 065-1196ALX: 1300 nm nominal (1270 nm max.,1355 nm min.)
P/N 065-1196ALXED: 1300 nm nominal (1261 nm max.,1360 nm min.)
Max Output Power:
P/N 065-1196A: -4.0 dBm
P/N 065-1196AED: 0.0 dBm
P/Ns 065-1196ALX/1196ALXED: -3.0 dBm
Min Output Power:
P/N 065-1196A: -9.5 dBm
P/N 065-1196AED: -6.0 dBm
P/N 065-1196ALX: -11.0 dBm
P/N 065-1196ALXED: -8.0 dBm
Sensitivity:
P/N 065-1196A: -13.5 dBm
P/N 065-1196AED: -17.0 dBm
P/Ns 065-1196ALX/1196ALXED: -22.0 dBm
Max Input Power:
P/N 065-1196A: -13.5 dBm
P/N 065-1196AED: 0.0 dBm
P/Ns 065-1196ALX/1196ALXED: -3.0 dBm
Link Power Budget:
P/N 065-1196A: 4.0 dB
P/N 065-1196AED/ 1196ALX: 11.0 dB
P/N 065-1196ALXED: 14.0 dB

  • ELECTRICAL CHARACTERISTICS

12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included.

  • ENVIRONMENTAL REQUIREMENTS

Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -14°F to 158°F (-10°C to 70°C)
Relative Humidity: 5% to 95% (non-condensing)

  • PHYSICAL CHARACTERISTICS

Dimensions: 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm)
Weight: 0.33 lb (150 g)

  • CERTIFICATIONS

CE, FCC, ROHS, VCCI Class A

  • WARRANTY

Limited Lifetime

 

 

Download Specifications (PDF 358 KB) Revised 03-2016

Download User’s Guide (PDF 189 KB) Revised 01-2014

Download Rev2 Quick Start Guide (PDF 281KB) Revised 01-2023

 

Part NumberDescriptionAdd to [?] 
065-1196A10/100/1000BaseT/TX to 1000BaseSX Media Converter, SC/MM 220 m Span on 62.5 μm Fiber / 550 m Span on 50 μm Fiber

Project

065-1196AED10/100/1000BaseT/TX to 1000BaseSX Media Converter, SC/MM 2 km Span on 62.5 μm or 50 μm Fiber

Project

065-1196ALX10/100/1000BaseT/TX to 1000BaseLX Media Converter, SC/SM, 10 km Span

Project

065-1196ALXED10/100/1000BaseT/TX to 1000BaseLX Media Converter, SC/SM, 20 km Span

Project

 

Mounting Options

Part NumberDescriptionAdd to [?] 
AM10010DIN-Rail Mounting for 065-11xx Series and 065-1696SFPDR Media Converters

Project

065-118516-Bay Rack Mount Media Converter Chassis, AC

Project