10/100 to 100FX PoE Media Converters
DISCONTINUED – 065-1050ST, 065-1050SC, and 065-1052SC
For replacement options contact Technical Support
The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection. This AC-powered PoE media converter combines data received over a fiber optic link with –48 Volt DC power, which the PD can use in lieu of a separate power connector. The 065-1050 series converters are also equipped with PD signature-sensing, power monitoring, over-current protection, under-current detection, and input fault protection features.
The 065-1050 series’ Link Fault Signaling (LFS) capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Far End Fault (FEF) capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered; the link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.
- PoE, to save power infrastructure costs
- Link Fault Signaling (LFS) with Far End Fault
- DIP Switches for Setting PoE Configuration
- Supports IEEE 802.3af PoE Power Source Equipment (PSE)
- Internal AC power supply
- Over-current protection & under-current detection
- Minimum load sensing
- Fault Protection Input
- APPLICABLE STANDARDS
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3u 100BaseFX
IEEE 802.3af PoE
- PORTS
1 – RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX port plus
1 – fiber optic 100BaseFX port
- LED STATUS INDICATORS
Power, PoE, TP Link/Act, 100, FX Link/Act, FDX/COL, 4W, 7W, 15.4W, Power Bad Nine LEDs total
- PERFORMANCE
Latency: <4.5 µs (LIFO).
Throughput @ 100Base: 148,810 pps (64-byte packets)
- FIBER INTERFACE
Type: LED
Wavelength: 1300 nm nominal (1270 nm max.,1380 nm min.)
Max Output Power: -14.0 dBm
Min Output Power: -20.0 dBm
Sensitivity: -33.0 dBm
Max Input Power: -8.0 dBm
Link Power Budget: 13.0 dB
- ELECTRICAL CHARACTERISTICS
Maximum Wattage: 24 Watts
PSE Power Feed Support: “Endpoint” via TP pin 1, 2, 3, 6
Maximum PoE Wattage Deliverable: 15.4 Watts (with a 15.4 Watt PoE device connected)
AC Input: 100 ~ 240 VAC, 50 ~ 60 Hz internal universal power supply
- ENVIRONMENTAL CHARACTERISTICS
Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -4°F to 158°F (-20°C to 70°C)
Relative Humidity: 5% to 90% (non-condensing)
- PHYSICAL CHARACTERISTICS
Dimensions: 6.22″W x 5.24″D x 1.57″H (158mm x 133mm x 40mm)
Weight: 1.66 pounds (0.75 kilograms)
- CERTIFICATIONS
UL Listed
- WARRANTY
Limited Lifetime
