MAXnet Pre-Terminated Copper Cassettes and Adapter Plates

   
       
 

 

  • Multiple pre-terminated solutions for the EDGE, Colo-located and Hyperscale Data Centers
  • Part of the Data Center Hybrid Panel product set that offers a universal footprint solution for Fiber, Copper, Coax, HDMI and any other keystone format into a single rack space
  • Purpose built Copper Cassette for rapid deployment of cross connects, console management and IP based power management solutions
  • Utilizes pre-terminated copper cassettes with cable management for Cassette to Cassette or Cassette to staggered copper trunk solutions
  • MAXnet Cassettes provide labeling as a service and guaranteed headroom for performance
  • MAXnet pre-terminated Copper cassettes with up to 550 MHz transmission performance
  • Rapid Deployment through Signamax’s Just Right Density™ approach when using pre-terminated MAXnet cassettes

 

 

  • TRANSMISSION PERFORMANCE

ANSI/TIA-568-C.2: 100% tested
Cat 5e: Tested to 1-100 MHz permanent link specifications
Cat 6: Tested to 1-250 MHz permanent link specifications
Cat 6a: Tested to 1-550 MHz permanent link specifications

  • TRANSMISSION MEDIA

Unscreened 100-Ohm twisted pair (U/UTP)

  • JACK TYPE

8p8c (8-position, 8 contact) “RJ45” style, keystone design

  • WIRING SCHEME

ANSI/TIA-568-c.2: T568B

  • WIRE GAUGE

Cat 5e: 24 AWG, Solid Copper
Cat 6: 23 AWG, Solid Copper
Cat 6a: 23 AWG, Solid Copper

  • CONSTRUCTION

MAXnet Cassettes:
Material: 0.036 in (0.9mm) Steel
Finish: black epoxy powder coating

Short Body Adapter Plates:
Material: 0.06 in (1.5mm) Aluminum Alloy
Finish: black epoxy powder coating

Jack:
Housing: High impact thermoplastic, UL94V-0 fire retardant
Jack Spring Wire: Phosphor bronze alloy plated with 50 μin of gold over 70 to 100μin of nickel
IDC: 110 type, phosphor bronze alloy with 100 μin 100% tin alloy

Plug:
Assembly: FCC Part 68 Subpart F
Housing: UL Listed 94V-0 flame retardant polycarbonate
IDC Blades: Phosphor bronze, min 50 μin of gold plating over 100 μin of nickel in contact area

Cable:
Material: 23 or 24 AWG Solid bare copper
Insulation: High density polyethylene

Jacket:
Dimensions: Diameter < 0.25 in (6.35 mm)
Material: Flame retardant PVC compound

  • CAPACITY

Max Copper Density: 6 Ports

  • MECHANICAL

Jack:
Total Contact Force: Min 800 g for 8 wire leads
Retention: 50 N (11 lbf) for 60 ± 5 s
Mating Cycle Life: Min 750 cycles

Plug:
Retention: 50 N (11 lbf) for 60 ± 5 s
Mating Cycle Life: Min 750 cycles
Tensile Strength: ≥ 20 N per wire

Cable:
Tensile Strength: ≥ 20 N per wire
Retention: 50 N (11 lbf) for 60 ± 5 s
Minimum bend radius: 1 in (25 mm)

  • DIMENSIONS

MAXnet Cassettes: 1” H x 6.3” D x 4” W (28 x 160 x 105 mm)
Short Body Adapter Plates: 1” H x3” D x 4” W (28 x 80 x 105 mm)

  • WEIGHT

MAXnet Cassettes: 0.57 lb (0.26 kg)
Short Body Adapter Plates: 0.19 lb (0.086 kg)

  • ENVIRONMENTAL CONDITIONS

Service Temperature: -40 to 176 °F (-40 to 80 °C)
Operating RH: 93% Max (non-condensing)

  • COMPLIANCE

ANSI/TIA-568-C.2, IEC 60603-7, IEC 61156-6, IEC 60332-1-2,
FCC Part 68 Subpart F, UL 94V-0, UL 444. UL 1666

  • WARRANTY

5 – Year Limited Component

 

 

Download Specifications (PDF 568 Kb) Revised 09-2019

 

 

MAXnet ADAPTER PLATES

Cat6 Plates

Part NumberDescriptionAdd to [?] 
DCHC-C6-06-WHybrid Copper Adapter Plate , 6 Cat 6 Ports, White

Project

DCHC-C6-06-YHybrid Copper Adapter Plate , 6 Cat 6 Ports, Yellow

Project

DCHC-C6-06-OHybrid Copper Adapter Plate , 6 Cat 6 Ports, Orange

Project

DCHC-C6-06-RHybrid Copper Adapter Plate , 6 Cat 6 Ports, Red

Project

DCHC-C6-06-BHybrid Copper Adapter Plate , 6 Cat 6 Ports, Blue

Project

DCHC-C6-06-GHybrid Copper Adapter Plate , 6 Cat 6 Ports, Green

Project

DCHC-C6-06-KHybrid Copper Adapter Plate , 6 Cat 6 Ports, Black

Project

Cat6a Plates

Part NumberDescriptionAdd to [?] 
DCHC-CA-06-WHybrid Copper Adapter Plate , 6 Cat 6a Ports, White

Project

DCHC-CA-06-YHybrid Copper Adapter Plate , 6 Cat 6a Ports, Yellow

Project

DCHC-CA-06-OHybrid Copper Adapter Plate , 6 Cat 6a Ports, Orange

Project

DCHC-CA-06-RHybrid Copper Adapter Plate , 6 Cat 6a Ports, Red

Project

DCHC-CA-06-BHybrid Copper Adapter Plate , 6 Cat 6a Ports, Blue

Project

DCHC-CA-06-GHybrid Copper Adapter Plate , 6 Cat 6a Ports, Green

Project

DCHC-CA-06-KHybrid Copper Adapter Plate , 6 Cat 6a Ports, Black

Project

RG6 Plate

Part NumberDescriptionAdd to [?] 
DCHC-R6-06-KHybrid Copper Adapter Plate , 6 RG6 Isolated Ports, Black

Project

 

 

Empty Plate

Part NumberDescriptionAdd to [?] 
DCHC-EC-06-NHybrid Copper Adapter Plate , Empty Plate

Project

 

MAXnet CASSETTES

Part NumberDescriptionAdd to [?] 
DCMCK-C6CHWM-C200K2 X 1U Hybrid Panel with 2 x MAXnet 6 Port Copper Cat6 Cassette to Cassette, 200ft Blue CMP Trunk, 24 x 1m Cat 6 patch cord and 2 x Front and Rear Zero U Cable Managers for cable strain relief and patch management

Project

DCMCK-CAACHWM-C200K2 X 1U Hybrid Panel with 2 x MAXnet 6 Port Copper Cat6a Cassette to Cassette, 200ft Blue CMP Trunk, 24 x 1m Cat 6 patch cord and 2 x Zero U Cable Managers for cable strain relief and patch management

Project

DCMCK-C6CHWM-S100K1 X 1U Hybrid Panel with 2 x MAXnet 6 Port Copper Cat 6 Short Body Adapter Plate to Red Jacks, 100ft Staggered Left White CMR Trunk, 24 x 1m Cat 6 patch cord and 1 x Zero U Front and Rear Cable Managers for strain relief and patch management

Project

Everything needed for 12 Copper Ports
Easy Order Part Numbers utilize 2 out of the 4 available slots in the Hybrid Panels
providing for additional customization or expansion

 

DATA CENTER HYBRID PANEL

Part NumberDescriptionAdd to [?] 
DCHP-1U1U Data Center Hybrid Panel, 4 Slot

Project